ZHC5010 mangler device 2 efter firmware update

Fora omkring Homeseer.
Besvar
Lyngtoft
Indlæg: 47
Tilmeldt: man dec 29, 2014 9:38 pm

ZHC5010 mangler device 2 efter firmware update

Indlæg af Lyngtoft » tors aug 16, 2018 2:51 pm

Hej,

Jeg har netop opdateret min ZHC5010 til v2.3 via Homeseer.. Jeg har includet enheden igen og fået en ny NODE, men uanset hvad jeg prøver mangler "Knap 2" i listen (Både switch binary og switch multilevel):
Capture.JPG
Capture.JPG (58.11 KiB) Vist 546 gange
Det "sjove" er at loggen skriver at den finder alle 4 devices (8 of 8 child nodes were created..) og ingen errors i loggen og en rescan. Så tænker om det er noget jeg gør forkert.. Har excluded og includet nogle gange med samme resultat.

Kode: Vælg alt

Aug-16 2:48:13 PM	 	Z-Wave	8 out of 8 Child devices of node 25 were created successfully.
Aug-16 2:48:07 PM	 	Z-Wave	Getting association information for Node 25 Z-Wave Switch Binary
Aug-16 2:48:06 PM	 	Z-Wave	Assigning return route from node 1 to Node 25 Z-Wave Switch Binary
Aug-16 2:47:46 PM	 	Z-Wave	ZWave controller: Adding association for Z-Wave device Node 25 Z-Wave Switch Binary (Node 25, Group 4, Endpoint 4) to HomeSeer
Aug-16 2:47:44 PM	 	Z-Wave	Assigning return route from node 1 to Node 25 Z-Wave Switch Binary
Aug-16 2:47:42 PM	 	Z-Wave	ZWave controller: Adding association for Z-Wave device Node 25 Z-Wave Switch Binary (Node 25, Group 3, Endpoint 3) to HomeSeer
Aug-16 2:47:40 PM	 	Z-Wave	Assigning return route from node 1 to Node 25 Z-Wave Switch Binary
Aug-16 2:47:34 PM	 	Z-Wave	ZWave controller: Adding association for Z-Wave device Node 25 Z-Wave Switch Binary (Node 25, Group 2, Endpoint 2) to HomeSeer
Aug-16 2:47:33 PM	 	Z-Wave	Assigning return route from node 1 to Node 25 Z-Wave Switch Binary
Aug-16 2:47:18 PM	 	Z-Wave	ZWave controller: Adding association for Z-Wave device Node 25 Z-Wave Switch Binary (Node 25, Group 1, Endpoint 1) to HomeSeer
Aug-16 2:47:18 PM	 	Z-Wave	All associations for node 25 have been retrieved successfully, it supports associations on these groups: 1, 10, 11, 12, 13, 14, 15, 16, 17, 18, 2, 20, 21, 3, 4, 5, 6, 7, 8, 9.
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 9 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 8 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 7 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 6 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 5 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 4 can have 5 associations, and currently has 1
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 3 can have 5 associations, and currently has 1
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 21 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 20 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 2 can have 5 associations, and currently has 1
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 18 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 17 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 16 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 15 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 14 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 13 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 12 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 11 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 10 can have 5 associations, and currently has 0
Aug-16 2:47:18 PM	 	Z-Wave	Node 25 Association Group 1 can have 1 associations, and currently has 1
Aug-16 2:47:01 PM	 	Z-Wave	Getting association information for node 25
Aug-16 2:47:01 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_MULTILEVEL_V3, Endpoint 4
Aug-16 2:47:01 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 4
Aug-16 2:47:00 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_MULTILEVEL_V3, Endpoint 3
Aug-16 2:47:00 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 3
Aug-16 2:47:00 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_MULTILEVEL_V3, Endpoint 2
Aug-16 2:47:00 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 2
Aug-16 2:47:00 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_MULTILEVEL_V3, Endpoint 1
Aug-16 2:47:00 PM	 	Z-Wave	Processing Information for Node 25 Multi-CHANNEL Command Class of SWITCH_BINARY, Endpoint 1
Aug-16 2:46:57 PM	 	Z-Wave	Node 25 is a Z-Wave Plus node. Retrieving ZWPlus Info...
Aug-16 2:46:57 PM	 	Z-Wave	Node 25 is Z-Wave version: Lib: 4.33 App: 2.3
Aug-16 2:46:57 PM	 	Z-Wave	Node: 25 Controls Class(es): SWITCH_BINARY, SWITCH_TOGGLE_BINARY, SWITCH_MULTILEVEL_V3
Aug-16 2:46:57 PM	 	Z-Wave	Node: 25 Supports Class(es): ZWAVEPLUS_INFO, VERSION_V2, MANUFACTURER_SPECIFIC_V2, DEVICE_RESET_LOCALLY, POWERLEVEL, FIRMWARE_UPDATE_MD_V2, ASSOCIATION_V2, ASSOCIATION_GRP_INFO_V2, MULTI_CHANNEL_ASSOCIATION_V3, CONFIGURATION_V4, MULTI_CHANNEL_V3, SWITCH_BINARY, SWITCH_TOGGLE_BINARY, SWITCH_MULTILEVEL_V3, CENTRAL_SCENE_V2, INDICATOR_V2
Aug-16 2:46:57 PM	 	Z-Wave	Syncing Z-Wave nodes with device list...
Aug-16 2:46:57 PM	 	Z-Wave	Found 14 Z-Wave nodes
Aug-16 2:46:57 PM	 	Z-Wave	Getting Z-Wave node list for network DE74246B...

Morten H. Nielsen
Indlæg: 6004
Tilmeldt: tors mar 20, 2008 11:02 pm
Geografisk sted: Danmark

Re: ZHC5010 mangler device 2 efter firmware update

Indlæg af Morten H. Nielsen » tors aug 16, 2018 3:06 pm

Du kan prøve en rescan af devicet, når du har root device.

Og så er der klasikeren med at huske at vælge alle /den rigtige type i device oversigten.
Mvh
Morten

Lyngtoft
Indlæg: 47
Tilmeldt: man dec 29, 2014 9:38 pm

Re: ZHC5010 mangler device 2 efter firmware update

Indlæg af Lyngtoft » tors aug 16, 2018 3:37 pm

Desværre, samme problem :-(
Slettede alle child devices og rescannede, siger faktisk "9 out of 9 Child devices of node 25 were created successfully." i loggen, men mangler stadig de to devices.
"Node information" lister dem heller ikke:
Capture.JPG
Capture.JPG (168 KiB) Vist 542 gange

Morten H. Nielsen
Indlæg: 6004
Tilmeldt: tors mar 20, 2008 11:02 pm
Geografisk sted: Danmark

Re: ZHC5010 mangler device 2 efter firmware update

Indlæg af Morten H. Nielsen » tors aug 16, 2018 3:47 pm

Måske rescanne et par gang uden at slette?

Jeg har ikke prøvet de nye firmware til ZHC5010. Men det er en metode jeg tit har fået de sidste devices med fra andre enheder.
Mvh
Morten

superwerder
Indlæg: 379
Tilmeldt: man jan 09, 2017 8:14 pm

Re: ZHC5010 mangler device 2 efter firmware update

Indlæg af superwerder » fre aug 17, 2018 12:20 pm

Har du slået alle filtre fra i device oversigten. Måske har de forputtet sig.
mvh superwerder

Homeseer bruger

Besvar